Manufacturer of Level Switch, Level Transmitter,
Detector and Sensor DITECH,LTD.
DITECH,LTD.
L type
L type
L type
Impedance type Level transmitter
IP-QBS
IP-NSB
proof
construction
Non-explosion-proof
Intrinsically safe construction(i3nG5)
The impedance type level transmitter IP model is ideal for measuring the good electrical property liquids and the fine particles.
measurement
object
|
Electrolytic solution, such as Sea water, Salt water, Soy sauce Acid, Alkaline solution, Molten salt, etc. Click here for more information on suitable product for each object to be measured. |
 |
|
Conductive powder or particle such as Carbon powder, Caustic soda, Metal powder, Metalloid power, etc. Click here for more information on suitable product for each object to be measured. |
 |
The impedance type level transmitter IP model is ideal for measuring the good electrical property liquids and the fine particles. In terms of electrical property, every material is roughly classified into the insulating material such as the oil, the demineralized water synthetic resin, etc., the an electrically good conductor such as the metals, and the intermediate conductor which is the product between the insulating material and the electrically good conductor.
The intermediate conductor is the electrolytic solution including the molten salt, the salt, the acid, the aqueous solution of alkali, etc. in addition to the carbon powder. The intermediate conductor cannot be often measured with the electrical capacitance instrument or the differential measuring instrument in the past because it causes the adhesion, the wetting, and the crystallization to the detector (electrode). Ditech's IP model is exclusively designed for such intermediate conductor as well as electrically good conductor.
principles
You may consider that the above operation is that of the potentiometer for the fluid as if the portion filled with the fluid is short-circuited by the liquid junction after being replaced by the parallel resistance while the series resistance lines up limitlessly when the tank is empty (including the adhesion).
Install in the tank the element having the impedance ideal for the fluid. The element is short-circuited by the fluid to the level filled with the fluid measured, and the voltage generated by sending constant current into the element is in inverse proportion to the level. (Install the liquid junction electrode when the container is GL, FRP, and so on). Convert it into the unified signal, and transmit the level signal.
-
Measures highly conductive and adhesive fluids with high accuracy.
(Suitable for fluids that cannot be measured with a differential-pressure or capacitive system) -
Immune to the effects of pressure or specific gravity.
-
Offers the highest level of reliability due to a simple operating principle and structure.
-
Detector and transducer can be separately installed without effecting the device's operating performance.
-
Suitable for measuring Molten salt, Metal, etc.
- Lightning arrestor (option) protects the device from lightning-induced surges.
| Measuring span | 0m～10m（Depends on the specifications |
| Output signal | DC4～20mA DC1～5V ※ One of the above signal |
| Input power | Model IP-QBS(Model IPS-0)： AC105V/210V 50/60Hz or DC24V Model IP-NSB(Model PS-2)： AC105V/210V 50/60Hz |
| Power consumption | 10W |
| Linearity | ±2% FS |
| Allowable temperature | Detector： －50℃～＋1000℃ (Depends on the specifications) Transducer： Model IPS-0： －10℃～＋50℃ Transducer： Model ITR-2： －25℃～＋70℃ Power source： Model PS-2： －10℃～＋50℃ Special cable： Model DSC-15 (high accuracy use)： －10℃～＋60℃ Special cable： Model DSC-05 (small size)： －10℃～＋60℃ Special cable： Model DSC-13 (heat resistance use)： －50℃～＋200℃ |
| Allowable pressure | Detector： 20MPa (approx. 204kg/cm2G) (Depends on the specifications) |
| Weight | Transducer： Model IPS-0： 5.5kg Transducer： Model ITR-2： 4.3kg Power source： Model PS-2： 7.6kg |
| Size | Transducer： Model IPS-0： 216(W)×125(D)×259(H) Transducer： Model ITR-2： 200(W)×149(D)×220(H) Power source： Model PS-2： 250(W)×145(D)×275(H) (mm) |
| Installation | Detector： Flange mounting, etc. |
| Material | Detector： SUS304 SUS316 Nickel Tungsten Titanium Tantalum Gold Platinum PTFE Alumina Pyrex, etc. Head case： Light alloy SUS304 Salt resistant paint case, etc. |
Model IP-QBS
(Non-explosion-proof type)
＜Separated transducer type＞
This model is composed of detector unit, transducer and special cable.
Model IP-NSB
(Intrinsically safe construction / i3nG5)
＜Totally separated detector unit type＞
This model is composed of detector unit, transducer, relay power source and special cable that is 4 core control cable. As the transducer is designed to be installed in a dangerous area, the special cable can be made short enough to minimize picked-up noises, thus permitting a stable performance to be obtainable. As to performance, this model has the same characteristics as those of Model IP-QBS.
