Manufacturer of Level Switch, Level Transmitter,
Detector and Sensor DITECH,LTD.
DITECH,LTD.
Model OCT-1
Model OCT-1
Model OCT-1
Model OCT-1
Model OCT-1
Model OCT-2
Model OCT-2
Model OCT-3
General-purpose
Capacitive Level switch
OCT-1 (Integrated type)
OCT-2 (Separated type)
OCT-3 (Fully separated type)
General-purpose capacitive level switch at reasonable price and in short delivery
The mounting (connection) and length (any length between 250 mm and 2,000 mm) of this level switch can be fully designed according to the user’s specifications. Moreover, this model can be ready for shipment to meet a short delivery schedule (within 10 days after receiving an order).
General-purpose vibration type level switches are also available.
With features such as a wide range and simple sensitivity adjustment, this device is designed for normal-temperature, low-load and ordinary-pressure applications.
The general-purpose capacitive level switch is widely used to detect powders in printing toner manufacturing processes and for small- to medium-capacitance (electrostatic capacitance) applications.
| Output contact | 1SPDT（NO・COM・NC) |
| Input power | AC105V/210V 50/60Hz or DC24V |
| Power consumption | 4W |
| Allowable temperature | Detector： －10℃～＋70℃ Transducer： Model PS-C3： －10℃～＋50℃ Power source： Model PS-C2： －10℃～＋50℃ Special cable： Model RG(standard type)： －10℃～＋60℃ Special cable： Model TEF(heat resistance use)： －200℃～＋260℃ |
| Allowable load | Detector： Up to 250mm： 700kg/m2 Up to 1m： 230kg/m2 Up to 2m： 60kg/m2 |
| Allowable pressure | Detector： 1MPa (10kg/cm2G) |
| Weight | Transducer： Model PS-C3： 1.85kg Power source： Model PS-C2： 0.65kg |
| Size | Transducer： Model PS-C3： 154(W)×95(D)×166(H) Power source： Model PS-C2： 73(W)×55(D)×150(H) (mm) |
| Installation | Detector： Flange mounting Screws mounting, etc. |
| Material | Detector： SUS304 Polyacetal, etc. Head case： Light alloy |
Model OCT-1
(Non-explosion-proof type)
＜Integrated transducer unit type＞
Both detector unit and transducer (relay power source) are integrated. Detector unit with peek window for LED is also available as option.
Model OCT-2
(Non-explosion-proof type)
＜Separated relay power source type＞
This model is composed of detector unit with self-contained transducer, relay power source (Model PS-C2) and special cable (Model RG or TEF). The head size of detector unit can be compact. Detector unit with peek window for LED is also available as option.
Model OCT-3
(Non-explosion-proof type)
＜Totally separated transducer type＞
This model is composed of detector unit, transducer (relay power source) and special cable (Model RG or TEF). Transducer may be installed from the area exposed to Heat, Steam, Vibration, Powder or Gas. Head case can be chosen from either standard type or compact type on or before order, and Transducer with peek window for LED is also available as option.
